PERIPHERAL PUMP inch 1/4 MTP600 Ceme

Description

Description PERIPHERAL PUMP inch 1/4 MTP600 Ceme

Technical data

Body material	Brass
Seal material	EPDM / CERAMIC / GRAPHITE
Shaft material	Stainless steel
Electrical connect	cable
Insulation class	F/B
Power Supply	230V / 1 / 50Hz 120V / 1 / 60Hz 400V/ 1 / 50Hz
Max. Absorbed Current	1,15 A 2,3 A 0,65 A
Approvals	CE
Ambient temperature	45 °C
Fluid temperature	80 °C
Suction	Non Self Priming

Hydraulic connection Inlet / Outlet

Standard	G.¼ Female / G.¼ Female
Barb	From Ø6 to Ø118
Niples	G.¼ Male / G.¼ Male

Pump model MTP600HP

Hz	ΔP [barg]	Flow Rate [L/h]
50	0	480
50	2	280
50	4	50
60	0	570
60	2	375
60	4	170

Description PERIPHERAL PUMP inch 1/4 MTP600 Ceme

These peripheral pumps are designed to deliver high flow, even with a relatively small motor. Thanks to their compact dimensions, they are particularly suitable for installation on a compact cooling unit. These pumps are suitable for clean water and chemically non-abrasive liquids free of solids.

Compatibility

Description PERIPHERAL PUMP inch 1/4 MTP600 Ceme

– Single-phase induction motor (50 Hz-2800 rpm / 60 Hz-3400 rpm)
– IP44
– 6.3 µF capacitor
– 140°C thermal protection
– Maximum power consumption: 250 W
– Class F thermal insulation
– Fan-cooled
– For more information or to order, please contact our technical department.

Description PERIPHERAL PUMP inch 1/4 MTP600 Ceme

– Ambient Temperature: -20°C / 50°C
– Fluid Temperature: -10°C / 80°C (*Optional: 95°C)
– Operating: Maximum circuit pressure 10 bar, 100% ED continuous up to 4 bar, ED50% intermittent above 4 bar.
– Suitable for use with water and low-corrosive/abrasive fluids.
– For different operating conditions, please contact our technical department.

General features